AMP-AQM50
All-in-One Air Quality Monitoring SensorA compact, all-in-one environmental sensor node for high-precision air quality monitoring in industrial and commercial spaces. It measures particulate matter, temperature, humidity, VOC, NOx and CO₂ in a single device, replacing several standalone sensors and cutting installation effort, wiring and maintenance.
- Eight parameters in one device: PM1.0, PM2.5, PM10, CO₂, VOC, NOx, temperature and humidity
- Laser-based particle sensing detects fine dust from 0.3 to 10 µm
- Air Quality Index (0–500) calculated from PM2.5 for an at-a-glance status
- Data over LoRa, Modbus or Wi-Fi, ready for BMS, SCADA or the cloud
One sensor for the whole picture of your air
The AMP-AQM50 brings particulate matter, CO₂, VOC, NOx, temperature and humidity sensing together in one compact enclosure. Instead of wiring and maintaining several standalone sensors, one device gives you a complete, continuous view of air quality at each point you monitor.
Its laser-based particle sensor detects fine dust from 0.3 to 10 µm and reports PM1.0, PM2.5 and PM10. From PM2.5 it also calculates an Air Quality Index from 0 to 500, so operators can see conditions at a glance. Compensation algorithms keep temperature and humidity readings stable by minimising the effect of the sensor’s own heat.
The result: healthier, safer workplaces, process areas protected from contamination, and electrical and industrial equipment protected from corrosive gases and airborne pollutants, with the records you need for regulatory compliance.
| General | |
|---|---|
| Model number | AMP-AQM50 |
| Measured values | PM1.0, PM2.5, PM10, CO₂, VOC index, NOx index, temperature, relative humidity, Air Quality Index |
| Typical startup time | 30 seconds |
| Enclosure dimensions | 85 × 85 × 55 mm |
| Particulate matter | |
| Mass concentration range | 0 to 1,000 µg/m³ |
| Size detection range | PM1.0, PM2.5 and PM10 (0.3 to 10 µm) |
| Precision, PM1.0 and PM2.5 | ±(5 µg/m³ + 5% m.v.) for 0–100 µg/m³ ±10% m.v. for 100–1,000 µg/m³ |
| Precision, PM10 | ±25 µg/m³ (low range) or ±25% m.v. (high range) |
| Laser safety | Class 1 laser product (wavelength typ. 850 nm) |
| Air Quality Index (PM2.5) | 0–500 |
| Gases | |
| CO₂ measurement range | 0 to 40,000 ppm |
| CO₂ accuracy | ±(50 ppm + 2.5% m.v.) for 400–1,000 ppm |
| VOC index output | 1 to 500 index points (accuracy reached in under 1 hour) |
| NOx index output | 1 to 500 index points (accuracy reached in 6 hours) |
| Temperature & humidity | |
| Temperature range | −10 °C to 85 °C |
| Temperature accuracy | ±0.45 °C typical, ±0.7 °C maximum (15–30 °C) |
| Relative humidity range | 0–100% RH |
| Relative humidity accuracy | ±4.5% RH typical (at 25 °C) |
| Communication | |
| Data output | LoRa, Modbus, Wi-Fi |
Detects harmful pollutants early and reduces exposure to toxic air contaminants.
Continuous monitoring and records help you meet environmental rules and avoid penalties.
Keeps manufacturing areas within controlled air quality conditions.
Warns of corrosive gases and airborne pollutants that shorten the life of electrical and industrial equipment.
Early warning of poor air quality supports quick fixes and preventive maintenance.
VOC and NOx index trends point to pollution sources and ventilation problems.
Fast startup and continuous operation for round-the-clock monitoring.
One compact device instead of several standalone sensors means less wiring and maintenance.
Multi-parameter sensing for smart factory, building automation and smart infrastructure projects.
Complete air quality data from one compact device
Particles, gases, temperature and humidity in one enclosure instead of several sensors.
Laser-based particle sensing from 0.3 to 10 µm for accurate fine-dust data.
A 0–500 Air Quality Index from PM2.5 shows conditions at a glance.
LoRa, Modbus or Wi-Fi to suit your plant network, BMS or cloud.
Complete your monitoring system
Wireless temperature and humidity monitoring for panels and enclosures.
View product
RS485 Modbus temperature, humidity and dew-point probe for HVAC and buildings.
View product
Know what’s in the air you work in
Tell us about your site and how you want the data delivered, and we’ll recommend the right AMP-AQM50 setup for your plant, building or clean room.
Request a quote Book a demo