AMP-IoTG
4G WBTMS Gateway for Wireless Temperature MonitoringThe AMP-IoTG collects data from Amptronics wireless sensors and sends it over the 4G cellular network to the cloud. It brings busbar, bus duct and panel temperature and humidity readings to a dashboard you can open from anywhere, with no local server or network cabling needed at site.
- Receives encrypted (AES-128) data from BBS350BT, BBS350CT, AMP-WRHTC and AMP-WM2THC sensors
- Sends data over 4G: just add a SIM, the antennas and power
- Live readings, alarms, trends and reports on the cloud dashboard
- Remote sensor parameter updates through the gateway
Your switchgear temperatures, anywhere
In a wireless busbar temperature monitoring system (WBTMS), sensors fitted on busbars, bus ducts and inside panels report temperature and humidity wirelessly. The AMP-IoTG is the link between those sensors and the cloud: it receives their encrypted readings and forwards them over the 4G cellular network.
Because it uses its own cellular connection, the gateway works without a local server, IT network or new cabling, which makes it ideal for substations, remote sites and buildings where connecting to the plant network is difficult. Insert a data SIM, connect the RF and GSM antennas and a 9–24 V DC supply, and data starts flowing.
On the cloud dashboard your team sees live temperatures, alarms and trends for every monitored joint, gets alerts by email or SMS, and can update sensor parameters remotely through the gateway.
| General | |
|---|---|
| Model number | AMP-IoTG |
| Device type | 4G WBTMS gateway |
| Compatible sensors | BBS350BT, BBS350CT, AMP-WRHTC, AMP-WM2THC |
| Mounting | Two mounting holes for panel or wall fixing |
| Communication | |
| Cloud uplink | 4G cellular (SIM card), external GSM antenna |
| Sensor receiver | RF, external RF antenna |
| Sensor data security | AES-128 encrypted wireless data |
| Wired interface | RS485 (A, B) |
| Service port | USB |
| Power | |
| Supply voltage | 9–24 V DC |
| Indicators & controls | |
| Status LEDs | GSM, LINK, M TX, RF RX, PWR |
| Reset | RESET button |
Fit a data SIM in the SIM slot on the top of the gateway.
Screw on the RF antenna for the sensors and the GSM antenna for 4G.
Connect a 9–24 V DC supply to +V and Gnd and check the PWR and GSM LEDs.
| GSM | Cellular (4G) network status |
|---|---|
| LINK | Network link status |
| M TX | Data being transmitted over the cellular network |
| RF RX | Data being received from wireless sensors |
| PWR | Power on |
The simplest way to take WBTMS to the cloud
No local server, IT network or new cabling needed at site.
Readings from the sensors arrive AES-128 encrypted.
Live temperatures, alarms and trends on web and mobile.
Update sensor parameters through the gateway without a site visit.
Sensors that report to the AMP-IoTG
Battery-powered wireless busbar temperature sensor with a 5-year battery.
View product
CT-powered busbar sensor with no battery, for 0.4 to 66 kV systems.
View product
Wireless temperature and humidity monitoring for panels and enclosures.
View productTake your switchgear monitoring online
Tell us how many panels and sensors you have, and we’ll size the gateways and set up your cloud dashboard.
Request a quote Book a demo